BIM Modeling and Coordination
Edge-on-Hudson
Modernizing Urban Transit Infrastructure through LOD 400 MEPF BIM coordination, clash detection, and Revit modeling.
New YorkPharmaceutical BIM Services
Pharmaceutical Facility BIM Built for Cleanrooms and Compliance
Coordinated BIM for GMP manufacturing, cleanrooms and laboratories — with pressure zoning, HVAC, process utilities and interstitial spaces resolved before construction.
- Cleanroom zoning and pressure cascades coordinated
- Process utilities and HVAC fully clash-checked
- Fixed-price proposal within 24 hours
Get a Free Project Estimate
Share your scope and drawings. Our team will reply with a fixed-price proposal within 24 hours.
Your details stay private. We reply within one business day.
1,800+Projects delivered
250+Licensed BIM professionals
300+AEC firms served
98%Client satisfaction
Trusted by 280+ AEC firms worldwide
Case Study
50 River St, Sleepy Hollow, NY 10591Architectural , MEP
Edge-on-Hudson
Edge-on-Hudson is a $1 billion transit-oriented mixed-use development transforming the former 70-acre General Motors assembly plant site in Sleepy Hollow, New York, located just 25 miles north of Manhattan along the Hudson River.
- 850+Clashes Resolved Before Construction
- 30%Reduction in MEP-Related RFIs
- 5Trade Disciplines Coordinated Simultaneously
Life-Science BIM Modeling Designed for Controlled Environments
Pharmaceutical and life-science facilities carry some of the highest MEP densities of any building type. Cleanroom HVAC, process piping, pure water, clean steam, exhaust and electrical services all converge in interstitial spaces above controlled rooms.
Our BIM specialists model every system in coordination, respect room classifications and flows, and produce documentation that supports construction, qualification and long-term operations.
- Cleanroom classifications, pressure zones and airlocks modeled
- HVAC, exhaust and HEPA systems coordinated with ceilings and structure
- Process utilities: purified water, WFI, clean steam and gases
- Interstitial and walkable ceiling spaces coordinated for maintenance
- Documentation that supports commissioning and qualification
Challenges We Solve
Controlled environments leave no room for coordination errors. Our models address these challenges before construction starts.
Extreme HVAC Density
High air-change rates, HEPA filtration and large ductwork in limited interstitial space.
Process Utilities
Purified water, WFI, clean steam and process gases with slope, drainability and material requirements.
Zoning & Containment
Pressure cascades, airlocks and personnel and material flows that must remain intact.
Maintainability
Service access from outside classified areas to avoid disrupting production.
Validation Documentation
Accurate, traceable documentation to support commissioning and qualification.
Live-Facility Retrofits
Upgrades inside operating facilities where shutdown windows are short.
Air handling units, HEPA housings, supply and exhaust ductwork and pressure control modeled and coordinated.
Purified water, WFI, clean steam, compressed air and process gases modeled with slopes and supports.
Cleanroom walls, ceilings, doors, airlocks and finishes modeled to room classifications.
Power distribution, lighting, cable routing and controls coordinated with equipment and services.
Multi-trade coordination of interstitial spaces with clash logs and resolution tracking.
Process equipment, skids and lab benches modeled with access and maintenance zones.
Point cloud capture of existing facilities converted into as-built models for retrofits.
Fabrication-ready shop drawings for ductwork, piping and supports.
As-built models and asset data to support validation and facility management.
Facility Types
Every life-science building type has its own zoning, utility and containment requirements. We model to match.
Manufacturing
- GMP production facilities
- Oral solid dose plants
- Fill-finish facilities
- Packaging areas
Laboratories
- R&D laboratories
- QC / QA labs
- Biosafety labs
- Teaching labs
Cleanrooms
- ISO-classified cleanrooms
- Aseptic suites
- Compounding pharmacies
- Medical device cleanrooms
Support Facilities
- Central utility plants
- Warehouses & cold chain
- Waste treatment
- Admin & amenity buildings
Have drawings ready for your pharmaceutical facility project?
Send them over. We will review the scope and come back with a fixed-price proposal and delivery schedule within 24 hours — no obligation.
Our Featured Project
Coordinated, construction-ready BIM delivered for complex projects across the US.
BIM Modeling + Coordination, 15867 Clashes Detected
Wegmans Store
15867 clashes detected and resolved through precise BIM coordination for this Wegmans store
Washington, DC
BIM Modeling and Coordination
Mecklenburg County Public Schools
Fabrication-level MEP modeling supported prefabrication and accurate installation across Mecklenburg's school complex
Virginia
BIM Modeling and Coordination
Water Reclamation Plant
Modernizing Urban Transit Infrastructure through LOD 400 MEPF BIM coordination, clash detection, and Revit modeling.
City, Nevada
Multidiscipline BIM Modeling
Ball State University
LOD 400 multidiscipline BIM modeling delivered for Ball State University's K12 school building project scope
Indiana
MEPF BIM Modeling and Coordination
WMATA Northern Bus Garage
Modernizing Urban Transit Infrastructure through LOD 400 MEPF BIM coordination, clash detection, and Revit modeling.
Washington, DCSee how our BIM teams have supported architects, engineers and contractors on real projects.
How We Work
A structured workflow from kickoff to handover, with QA at every stage — so your team reviews finished, coordinated output, not work in progress.
Project Briefing
3D Modeling
QA Review
BIM Execution Planning
Clash Detection & Coordination
Final Handover
- Project Briefing
- BIM Execution Planning
- 3D Modeling
- Clash Detection & Coordination
- QA Review
- Final Handover
Why Choose MaRS
Our MEP specialists understand coordinated building systems in controlled environments, so your cleanrooms, labs and utilities are coordinated, maintainable and ready for qualification.
Teams used to the densest MEP environments, including cleanroom HVAC and process utilities.
Room classifications, pressure cascades and flows are modeled and protected through coordination.
Consistent, standards-compliant drawings and models that support commissioning and qualification.
NDA-backed projects and controlled access to sensitive design information.
Client Feedback
What Project Teams Say About Working With Us
Honest words from the people behind our continued success
Frequently Asked About Pharmaceutical BIM Services
Yes. We model air handling, HEPA filtration, supply and exhaust systems and represent room classifications and pressure zones in the model for coordination.
Yes. We model purified water, WFI, clean steam, compressed air and process gases, including slopes, drains and supports.
Yes. Interstitial and walkable ceiling spaces are coordinated so services remain accessible for maintenance from outside classified areas.
Yes. We use laser scan data to model existing conditions so retrofits can be planned around short shutdown windows.
We work under NDA, restrict file access to the assigned team and follow your document control procedures.
Get In Touch
Let’s Talk About Your Next Project
Share your drawings and project scope. We will review and send a proposal within 24 hours.